WARN 16.5ti THERMOMETRIC SELF-RECOVERY WINCH

$1,799.95

Purchase WARN 16.5ti THERMOMETRIC SELF-RECOVERY WINCH

WARN 16.5ti THERMOMETRIC SELF-RECOVERY WINCH
What do you get when you combine 16,500 lbs. of pulling power with all the innovative features of the WARN ti-series? The new WARN 16.5ti winch. The highest capacity, most technologically advanced truck winch in the industry today.

The 16.5ti features the full diagnostic ability of WARN Thermometric technology, plus the extreme sealing, durability and reliability that the WARN ti-series of winches are known for. The new, more efficient design delivers faster line speeds and lower amp draw. It's beefed up where needed, and features a new aluminum solenoid housing cover. Not to mention 90 feet of aircraft grade, 7/16" wire rope. If you've got a big rig, and you like to load it up, this is the winch to handle it.

16.5ti SPECS/PART NUMBERS

Part Number: PN 68801 (12V DC)

Rated Line Pull: 16500 lbs. (7484 kgs.) single-line

Motor: 12V 4.6 hp, Gen II, Series Wound

Remote Control: Remote switch, ti, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear Ratio: 315:1

Lubrication: Molybue: #1 or Aeroshell #17

Clutch (freespooling): Rotating Ring Gear

Brake: Automatic Direct Drive Cone

Wire Rope: 90', 7/16" diameter (27m, 11mm diam.)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery Leads: 2 gauge, 72" (1.83m)

Finish: Chromate with high-gloss dark gray powder coat

Drum Diameter/Length: 3.5"/8.2" (9cm/21cm)

Weight: 138 lbs. (63 kgs.)

12V DC PERFORMANCE SPECS

Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)

0
23.6(7.20)
68 amps
1/16500(7484)

2000(907)
12.07(3.68)
138 amps
2/15279(6930)

4000(1814)
9.22(2.81)
189 amps
3/12672(5748)

6000(2721)
7.37(2.25)
240 amps
4/10824(4910)

8000(3628)
6.08(1.85)
291 amps

10000(4536)
5.12(1.56)
342 amps

12000(5443)
4.40(1.34)
393 amps

14000(6350)
3.86(1.18)
444 amps

16000(7257)
3.38(1.03)
494 amps

16500(7484)
3.24(0.99)
507 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 24.7" L. x 8.5" D. x 9.7" H.
(628mm L. x 216mm D. x 247mm H.) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)