Warn 9.5ti Thermometric Winch

Purchase Warn 9.5ti Thermometric Winch

WARN 9.5ti THERMOMETRIC SELF-RECOVERY WINCH

The new 9.5ti packs 9500 lbs of pulling capacity into a massive 12.5 lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.

9.5ti SPECS/PART NUMBERS

Part Number: PN 67550 (12V DC)

Rated Line Pull: 9500 lbs. (4310 kgs.) single-line

Motor: Gen II, Series WoundTM

Remote Control: Remote switch, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 89 lbs. (36.3kgs.)

Wire Rope: 125', 5/16" diameter (30m, 8mm diam.)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery Leads: 2 gauge, 72" (1.83m)

Finish: Chromate with high-gloss powder coat

Nuts/Bolts: PN 39570

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	62(18.9)	47 amps	1/9500(4313)
2000(910)	16.3(4.97)	160 amps	2/8650(3927)
4000(1810)	11.8(3.60)	230 amps	3/7920(3595)
6000(2720)	9.31(2.84)	305 amps	4/7400(3359)
8000(3630)	7.59(2.31)	370 amps	5/6940(3150)
9500(4310)	6.67(2.03)	425 amps

  Above performance specs are based on first layer of drum

Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Warn Winches are currently unavailable for export. Orders for destinations outside of the USA will be canceled.

Purchase Warn 9.5ti Thermometric Winch