WARN XD9000i SELF-RECOVERY WINCH
$1,049.95Purchase WARN XD9000i SELF-RECOVERY WINCH
WARN XD9000i SELF-RECOVERY WINCH
You'll
probably see more XD9000i winches on trail rigs than any other winch.
No load line speed of 38-feet per minute and three-stage planetary
gearing and the ability to run cool with low amp draw for long winching
cycles are just a few reasons why.
| XD9000i SPECS/PART NUMBERS |
| Part Number: PN 27550 (12V DC), PN 275502 (12V DC, CE), PN 274022 (24V DC, CE) |
| Rated Line Pull: 9000 lbs. (4080 kgs.) single-line |
| Motor: 12V 4.6 hp, 24V 2.5 hp, Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 85 lbs. (38.5 kgs.) |
| Wire Rope: 125', 5/16" diameter (38m, 8mm diameter) |
| Fairlead: Roller |
| Recommended |
| Finish: Argent Powder Coat |
| Nuts/Bolts: PN 39570 |
| CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, Manuals, Safety Hook and Thimble. |
| 12V DC PERFORMANCE SPECS |
|||
| Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
| 0 |
38(11.6) |
70 amps |
1/9000(4082) |
| 2000(910) |
14.4(4.39) |
180 amps |
2/8190(3715) |
| 4000(1810) |
11(3.35) |
255 amps |
3/7500(3402) |
| 6000(2720) |
8.67(2.64) |
330 amps |
4/7010(3180) |
| 8000(3630) |
6.88(2.10) |
415 amps |
5/6570(2980) |
| 9000(4080) |
6.38(1.94) |
460 amps |
|
| 24V DC PERFORMANCE SPECS |
|||
| Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
| 0 |
27.2(8.29) |
44 amps |
1/9000(4082) |
| 2000(910) |
21(6.40) |
96 amps |
2/8190(3715) |
| 4000(1810) |
17(5.18) |
149 amps |
3/7500(3402) |
| 6000(2720) |
16(4.88) |
180 amps |
4/7010(3180) |
| 8000(3630) |
9(2.74) |
230 amps |
5/6570(2980) |
| 9000(4080) |
5.2(1.58) |
270 amps |
|
|
Winch Dimensions: 21.8" L. x 6.3" D. x 9.94" H.
(553mm L. x 160mm D. x 252mm H.) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Warn Winches are currently unavailable for export. Orders for destinations outside of the USA will be canceled.
Purchase WARN XD9000i SELF-RECOVERY WINCH
- Part #: WAR27550
Other products in the category Winches and Rope:
SMITTYBILT XRC10 10,000 lb Winch
Smittybilt XRC8 8000lb. Winch
Superwinch LP8500 8,500 lb. Winch
Tabor 9KWinch by Warn (aka Magnum 9K)
Universal 3/4 inch D-ring Recovery Shackle
WARN 16.5ti THERMOMETRIC SELF-RECOVERY WINCH
Warn 9.5si MOSFET Winch
Warn 9.5ti Multi-Mount Portable Winch
Warn 9.5ti Thermometric Winch
WARN 9.5xp SELF-RECOVERY WINCH
WARN M12000 SELF-RECOVERY WINCH
Warn M6000 SDP Portable Winch
WARN M6000 SELF-RECOVERY WINCH
Warn M8000 (Hawse Fairlead) Winch
Warn M8000 (Roller Fairlead)
WARN M8274-50 SELF-RECOVERY WINCH
Warn PowerPlant Dual Force HP Winch/Comp. 12000
Warn PowerPlant Dual Force HP Winch/Comp. 9000
Warn Works Winch 4700
WARN XD9000 SELF-RECOVERY WINCH
Warn XD9000i Multi-Mount Portable
WARN® SYNTHETIC WINCH ROPE
Start Over | 1981 | 1982 | 1983 | 1984 | 1993 | 1985 | 1986 | 1987 | 1988 | 1989 | Rampage Products | 1990 | 1991 | 1992 | 1994 | 1995 | 1996 | 2007 | 2008 | 2005 | 2006 | 1997 | 1998 | 1999 | 2003 | 2004 | 2000 | 1980 | 2001 | 2002 | 2009 | 2010 | 2009 | HONDA | Ridgeline | 3.5L V6 F/I | 1977 | 1978 | 1979 | 1970 | 1973 | 1975 | 1976 | 1974 | 1972 | 1971 | 4.0L V6 F/I | BDS | BDS Suspension | Blocks & U-Bolts | Daystar | Fat Bob's Garage | Fat Bob's Gear | Light Racing Control Arms | Performance 8000 Series Shocks | Performance Accessories | ReadyLift | Rough Country | Shocks | Superchips | Tools, Safety, and Recovery | Warn | Winches and Rope | Zone Offroad
lift kit leveling kit jeep lift kit toyota leveling kit ford leveling kit dodge leveling kit chevy leveling kit gmc leveling kit honda leveling kit
Fat Bob's Garage shopping cart powered by Nexternal
